Mobirise Site Generator

simturn AX
Internal Tooling System

Grooving from ø2mm minimum bore diameter
Boring from ø0.3mm minimum bore diameter
Copying / profiling from ø2.2mm minimum bore diameter
Chamfering from ø1mm minimum bore diameter
Back boring from ø3.2mm minimum bore diameter
Threading from ø0.73mm minimum bore diameter
Pre-part off and chamfer from ø3.7mm minimum bore diameter
Face grooving from ø6mm minimum outside diameter

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

  ► 98° boring inserts from Ø0.3mm

  ► 98° boring inserts from Ø1.0mm

  ► 98° boring inserts from Ø1.7mm

  ► 98° boring inserts from Ø2.2mm

  ► 98° boring inserts from Ø3.0mm

  ► 98° boring inserts from Ø3.7mm

  ► 98° boring inserts from Ø4.2mm

  ► 98° boring inserts from Ø4.9mm

  ► 98° boring inserts from Ø5.2mm

  ► 98° boring inserts from Ø5.9mm

  ► 98° boring inserts from Ø6.2mm

  ► Boring inserts from Ø1.0mm with special chipformer YS

  ► Boring inserts from Ø5.2mm with special chipformer YS

  ► Boring inserts from Ø2.7mm with special chipformer YE

  ► Boring inserts from Ø6.2mm with special chipformer YE

  ► CBN hard boring inserts from Ø1.0mm

  ► CBN hard boring inserts from Ø2.7mm

  ► CBN hard boring inserts from Ø4.2mm

  ► CBN hard boring inserts from Ø6.2mm

 ► 110° boring inserts from Ø1.0mm

 ► 110° boring inserts from Ø3.2mm

 ► 98° copy/profiling inserts from Ø2.2mm

  ► 90° boring inserts from Ø3.2mm

  ► Boring/chamfering inserts from Ø5.2mm

  ► Chamfering inserts from Ø1.0mm

  ► Back boring inserts from Ø3.2mm

  ► Grooving inserts from Ø2.0mm

  ► Grooving inserts from 0.78mm wide & Ø5.2mm

  ► Grooving inserts from 1.5mm wide & Ø5.2mm 

  ► Grooving inserts from 2mm wide & Ø5.2mm 

  ► Grooving inserts from 0.78mm wide & Ø6.2mm

  ► Grooving inserts from 1mm wide & Ø6.2mm

  ► Grooving inserts from 1.5mm wide & Ø6.2mm

  ► Grooving inserts from 1.98mm wide & Ø6.2mm

  ► Grooving inserts from 0.78mm wide & Ø7.2mm

 ► Grooving inserts from 1mm wide & Ø7.2mm

  ► Grooving inserts from 1.5mm wide & Ø7.2mm

  ► Grooving inserts from 1.98mm wide & Ø7.2mm

  ► Grooving inserts from Ø10mm

  ► Grooving inserts from Ø10.5mm

  ► Full radius grooving inserts from Ø4.2mm

  ► Pre-part off inserts from Ø3.7mm

 ► Internal part-profile ISO threading inserts from Ø0.73mm

  ► Internal part-profile ISO threading inserts from Ø3.9mm

  ► Internal full profile ISO threading inserts from Ø3.2mm

  ► Internal part-profile Trapezoidal threading inserts from Ø6.2mm

 ► Internal part-profile NPT threading inserts from Ø6.2mm

 ► Internal part-profile UN threading inserts from Ø4.2mm

  ► Internal part-profile UNC/UNF threading inserts from Ø3.9mm

Internal full profile Whitworth threading inserts from Ø5.2mm

  ► Face grooving inserts in bores from Ø6.2mm

 ► Face grooving inserts against spigots from Ø6.2mm

  ► Face grooving inserts in bores from Ø10mm

Face grooving inserts in bores from Ø12mm

  ► Face grooving inserts in bores from Ø16mm 

  ► Face grooving inserts in bores from Ø20mm

 ► Full radius face grooving inserts in bores from Ø6.2mm

  ► Full radius face grooving inserts against spigots from Ø6.2mm

 

  ► Standard round shank A04 toolholders

  ► Standard round shank A05 toolholders

  ► Standard round shank A06 toolholders

  ► Standard round shank A07 toolholders

  ► Standard round shank A08 & A10 toolholders


simturn AX tools

Connectcode - match the codes on both tool
and insert for the correct fit



simturn DX
Internal Tooling System

Grooving from ø7mm minimum bore diameter
Boring from ø7mm minimum bore diameter
Copying / profiling from ø7mm minimum bore diameter
Chamfering from ø7mm minimum bore diameter
Back boring from ø7.8mm minimum bore diameter
Threading from ø7mm minimum bore diameter
Pre-part off and chamfer from ø8mm minimum bore diameter
Face grooving from ø12mm minimum outside diameter

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

Boring inserts from Ø7mm

  ► Boring inserts with special chip former from Ø7mm

 ► CBN hard boring inserts from Ø7.8mm

  ► Copy/profiling inserts from Ø7mm

 ► Boring/chamfering inserts from Ø7mm 

  ► Back boring inserts from Ø7.8mm

  ► Grooving inserts from Ø7mm

  ► Grooving inserts from Ø8mm

  ► Grooving inserts from Ø9mm

  ► Grooving inserts from Ø10mm

 ► Grooving inserts from Ø11mm (D10)

 ► Grooving inserts from Ø11mm (D11)

  ► Grooving inserts from Ø12mm

  ► Grooving inserts from Ø14mm

  ► Grooving inserts from Ø16mm (D14)

  ► Grooving inserts from Ø16mm (D16) 

  ► Grooving inserts from Ø17mm

 ► Grooving inserts from Ø18mm

  ► Grooving inserts from Ø20mm

  ► Grooving/profiling inserts from Ø7.8mm

  ► Grooving/profiling inserts from Ø11mm

  ► Grooving/profiling inserts from Ø16mm

  ► Full radius grooving inserts from Ø8mm

 ► Full radius grooving inserts from Ø14mm

  ► Pre part-off inserts from Ø8mm

 ► Full profile ISO threading inserts from Ø9mm

 ► Full profile ISO threading inserts from Ø14mm

  ► Part-profile ISO threading inserts from Ø7mm

  ► Part-profile ISO threading inserts from Ø11mm

 ► Part-profile Trapezoidal threading inserts from Ø9mm

  ► Full profile Whitworth threading inserts from Ø10mm

  ► Part-profile Acme/Stub Acme threading inserts from Ø10mm

 ► Full profile NPT threading inserts from Ø10mm

 ► Full profile UN threading inserts from Ø10mm

Face grooving inserts in bores from Ø14mm

  ► Face grooving inserts against spigots from Ø12mm

  ► Full radius face grooving inserts in bores from Ø14mm

  ► Full radius face grooving inserts against spigots from Ø12mm


simturn DX tools

Connectcode - match the codes on both tool
and insert for the correct fit



simturn E3
Tooling System

Internal/External Grooving, Threading, Parting-Off, Face Grooving
Width of cut up to 5.29mm, Tmax up to 5mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn E3 tools

simturn E3 inserts


Connectcode - match the codes on both tool

and insert for the correct fit

simturn E12
Tooling System

Internal/External Grooving, Parting-Off, Face Grooving, Poly-V Grooving
Width of cut up to 5.29mm, Tmax up to 6mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn E12 tools

simturn E12 inserts


Connectcode - match the codes on both tool

and insert for the correct fit

simturn H2
Tooling System

Internal/External Grooving, Grooving & Profiling, Parting-Off
Width of cut up to 5mm, Tmax up to 18mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn H2 tools

simturn H2 inserts

Connectcode - match the codes on both tool
and insert for the correct fit

simturn GX
Tooling System

Internal/External Grooving, Grooving & Profiling, Parting-Off, Threading, Poly-V Grooving
Width of cut up to 6mm wide, Tmax up to 26mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn GX tools

simturn GX inserts


Connectcode - match the codes on both tool

and insert for the correct fit

simturn K2
External Tooling System

for small part machining
Grooving, Grooving & Profiling, Parting-Off, Threading, Back Turning
Width of cut up to 3mm, Tmax up to 7mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn K2 tools

simturn K2 inserts


Connectcode - match the codes on both tool

and insert for the correct fit

simturn C4
External Tooling System

for small part machining on Swiss Auto type machines
Grooving, Grooving & Profiling, Parting-Off, Threading, Turning, Back Turning
Width of cut up to 1.5mm, Tmax up to 5.5mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn C4 tools

simturn C4 inserts


Connectcode - match the codes on both tool

and insert for the correct fit.

simturn Decolletage
External Tooling System

semi-finished inserts for special form tools
Available in 10, 12, 16, 20, 25, 32, 48 & 66mm widths

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials

simturn Decolletage tools

simturn Decolletage inserts


Connectcode - match the codes on both tool

and insert for the correct fit.

GrooveTurn
External Tooling System

Grooving, Grooving & Turning
Tmax up to 40mm

Product Range Details

There are many occasions when a standard product won't quite do the job you have to produce, or you can't see anything to help you with a problem you may have. Premier offer a service for the design and manufacture of special cutting tools to customer requirements, which are available on short lead times. 

Please let us quote for your requirements. 

Specials